1) Product Description：
The products are widely used in mobile communication base station, microwave communication board/station, telecommunication room, factories, civil aviation, financial, securities, etc of the power supply system, such as various sub-station, substations, power distribution cabinet, AC/DC distribution screen, switch box, and other various important and are vulnerable to lightning equipment, make power system from lightning over voltage damage.
2) Product Characteristics:
◆ Composite structure, large capacity
◆ Nanosecond level response speed.
◆ Electrode use alloy materials, long service life.
◆ No continues current, no leakage current.
◆ Have remote signal function.
◆ 35 mm rails install structures, simple installation.
◆ can use for different grid, and comprehensive protection.
3) Product Parameters:
|
TYPE
|
JM-F380-I/25KA
|
|
Protection Class:
|
B
|
|
Max.Continuous Operating Voltage (Uc):
|
385V
|
|
Nominal Discharge Current (8/20μs) (In):
|
25KA
|
|
Pulse current (10/350μs) (Iimp ):
|
25KA
|
|
Voltage Protection Level( Up):
|
≤2.0KV
|
|
Response Time:
|
< 25ns
|
|
Leakage current(μA):
|
none
|
|
Working Environment:
|
Temperature -20°C +80°C;Relative humidity<95%;
|
|
indicate deterioration:
|
green(normal),red(malfunction)
|
|
Protection Mode:
|
L-PE,N-PE
|
|
Material of Outer Shell:
|
Flame retardant materials PBT
|
|
Dimension(mm):
|
144x90x66
|
|
Weight(kg):
|
0.987
|
◆ SPD polarity can't reverse connection, fire wire joint "L", ground wire joint "PE".
◆ before the installation must cut off the power supply; it is strictly prohibited to power operation.
◆ All wirings must be solid and connected by electrics cable: BVR≥10mm2., and should be short, thick, straight.
◆ Please install according to schematic diagram, L1, L2, L3 for line, N is null line, PE for ground. Do not misconnection. Please check SPD operate or not after installation.
◆ This product can uses double connection mode way, commonly; only need connect one of two terminals.
◆Please check SPD operate or not after finishing installation.
◆Please don't remove by non professional person.
|
